Kamis, 14 Mei 2009

Five Steps to keep your car looking its best.

1. Avoid scratches as much as possible
We start with scratches. Why? Because they are the biggest enemy to your car's finish. And avoiding scratches is the secret to keeping your car looking good. Dirt and grime, rubbed in while washing or drying, will act like sandpaper and dull your car's paint. There is one basic rule which will guide you whenever you touch the surface of your automobile:
Anything that comes in contact with your car's finish should be soft.

2. As much as possible, protect your cars finish from the elements.
This means storing the car in a garage or covered area. Also, the use of a car cover is highly recommended. A car that is constantly exposed to sunlight and other environmental hazards will deteriorate quicker and require significantly more cosmetic maintenance.
3. Always keep a good coat of wax or paint sealant on the car.
In addition to providing gloss and depth, wax will also protect your car from the elements, including sunlight and many other circumstances that you will encounter, from bug carcasses to bird droppings.
4. Be aware of your car's finish.
Make regular quick inspections of your cars surface a habit. Look it over and note its condition, keeping in mind its recent history and what you anticipate will happen in the future.
5. Make a habit of detailing your car.
In most cases, washing your car once a month is adequate. Once every two weeks is better and necessary if the car is subject to harsh conditions.

Senin, 04 Mei 2009

car detailing picture


we're the expert!

Jumat, 01 Mei 2009

What is Detailing?

While there are no specific guidelines for what actually makes up a 'detail,' it is always more extensive than washing and drying a car, and will often involve many steps. Main goals are typically beautification and protection, but can also touch other areas such as minor paint repair and surface restoration, as well as thoroughly cleaning areas which are normally ignored such as the engine and underchassis, wheels, tires, and trim.

The steps of a basic exterior detail of the paint surface generally consist of, in this order, wash, dry, clay bar, wash again, polish, glaze, sealant, wax. Application of a glaze is optional, as is application of both a sealant and wax.

A variety of shampoos, cleaners, degreasers, protectants, lubricants, polishes, clay bars, and waxes have developed over time to suit various demands of consumers and professionals.

Clay bar

Clay is a mixture of clay base and various mild abrasives that is used to remove paint contamination. Spray wax, window cleaner or water can work as a clay lubricant. Road grime, tar, bugs, rust, tree sap and even paint overspray can be removed with a clay bar. Claying does not remove the clear coat of the paint but can cause marring or dullness if used incorrectly. It takes a few passes of clay to feel the difference on the surface of the paint. Claying does not replace polishing. It is simply a process that should be used before polishing compound is used. Claying should be used once or twice a year depending on the condition of the paint.

Purpose of Polishing

The purpose of polishing is to remove oxidation, swirls, scratches, water deposits, and other imperfections from the paint. In contrast to a clay bar, which removes contamination, polishes remove surface imperfections. Polishing generally is the single most time consuming step in an exterior detail.

Polishes typically are classified in two categories, a chemical polish or abrasive polish. A chemical polish, sometimes called a prewax cleaner, cleans the surface and removes oxidation. An abrasive polish removes a small portion of the clearcoat or the base paint itself on single stage paint. Abrasive polishes are typically called compounds, and are classified based on how abrasive they are. The polish with the most abrasion typically is called a Rubbing Compound. A Rubbing Compound will remove heavier scratches and swirls as well as oxidation. It can be compared to a very fine sandpaper. The polish with the least abrasion typically is called a finishing polish. A finishing polish is used to remove light oxidation and fine scratches and swirls. It is also used to remove the haze resulting from application of a more abrasive polish. Abrasive polishes work best when applied with a machine rotary buffer or machine random orbital buffer. Different pads are used on the buffer depending on the abrasion level of the polish.

An "All in One" product typically combines a chemical polish and sealant to be applied in one step. A "buff and wax" contains a high level of cleaner and U.V. protectant or carnauba wax, producing a polish and providing a protective film. Unlike a chemical polish or abrasive polish, a glaze does not clean or abrade the paint. A glaze typically contains oils and kaolin to fill and mask minor imperfections remaining after polishing, and to enhance the brilliance of the finish. If a glaze is applied, it is used after use of a chemical polish or abrasive polish or All in One product, but before application of a sealant or wax.

Purpose of Sealants and Waxing

Synthetic sealants are polymer based and provide much more durability than even the best carnauba wax. They are liquid in form and apply very much like a liquid wax. It is usually suggested that most sealants cure for 12 to 24 hours before layering additional coats on the paint or applying wax over the sealant. Curing involves the cross-linking of polymer strands. When cross-linking is completed, the product has "cured." Some sealants contain an accelerator, or are sold with a separate accelerator that is mixed with the sealant before use, which speeds up the cross-linking (curing) process. For best results, the surface of the vehicle should be properly prepared for a sealant, which involves cleaning and polishing the paint prior to application. Applying a sealant over a wax or surface contamination may inhibit the bonding of the product to the paint. Once you top a sealant with a wax you will not be able to apply additional layers of the sealant without first cleaning the paint and removing all the wax.

Waxing further enhances the gloss and depth of the paint, and provides even more (but shorter lasting) protection. Wax comes in many forms including cream, paste, and liquid. Most waxes contain carnauba which contains a high amount of fatty acids. This fatty acid creates a solid layer between the paint and the outside world which protects it, and gives it a glossy finish. Synthetic waxes commonly mix low amounts of cleaners with high amounts of U.V. inhibitors to create the same protective layer that carnauba does. Synthetic wax creates a high gloss while carnauba waxes give a warm and wet looking finish.

The difference between a Wax and a Polish

Wax is a protective coating that is applied to the exterior surface of an automobile to improve shine and prevent oxidation.

Polish is a cleaning compound that removes impurities from the paint which prepares it for waxing, sealing, or protecting.

Wax and polish are very different and should not be confused, although the retail industry has mixed them together in advertising, such as promoting a wax that polishes, too. This is not generally possible because the substances perform separate functions.

Experience is required when working with polishes. Polishing agents remove oxidation, surface contaminants and also some of the clearcoat surface. An inexperienced polisher can create swirl marks on the painted or clearcoat surface. Swirl marks can be hidden or masked when applied with wax but will return once the wax wears off.

Ada kesalahan di dalam gadget ini

kemPlink Auto Detailing / THE PADDOCK © 2008 Template by Dicas Blogger.

TOPO